recherche tubes de fourche fantic 300
2 participants
BIENVENUE SUR LE FORUM DU TRIAL A L'ANCIENNE :: Votre 1ère catégorie :: MOTOS (Les marques et modèles) :: FANTIC
Page 1 sur 1
recherche tubes de fourche fantic 300
Bonjour à tous,
ça fait un moment que je recherche à remplacer les tubes de fourche de mon fantic 300 car ils sont trop piqués. J'ai déjà changé les joint de spi, mais rien à faire.
[Vous devez être inscrit et connecté pour voir cette image]
Si vous avez pas les tubes de fourche pour le 300, je suis preneur pour tout autre modèle complet qui se monte dessus; mais là il faut les tubes et fourreaux.
par exemple: 240 / 301 / 303 / ou autre??
Si quelqu’un à sa en stock, je suis preneur.
Merci d'avance pour vos recherches dans vos stocks et réserves.
jan
ça fait un moment que je recherche à remplacer les tubes de fourche de mon fantic 300 car ils sont trop piqués. J'ai déjà changé les joint de spi, mais rien à faire.
[Vous devez être inscrit et connecté pour voir cette image]
Si vous avez pas les tubes de fourche pour le 300, je suis preneur pour tout autre modèle complet qui se monte dessus; mais là il faut les tubes et fourreaux.
par exemple: 240 / 301 / 303 / ou autre??
Si quelqu’un à sa en stock, je suis preneur.
Merci d'avance pour vos recherches dans vos stocks et réserves.
jan
janmaru- Messages : 213
Date d'inscription : 19/05/2014
Age : 56
Localisation : 11000 AUDE
Re: recherche tubes de fourche fantic 300
My present fork tubes are like that … but worse
.. what i have done is use Araldite glue and dribble it into the scratches and heat a little with a heat gun.. then leave for two days to go hard.
Then i file and smooth down with wet and dry paper to a smooth finish so that you cant feel the scratches with your fingers as you run them over … mine have been like it for a while now and no oil leaks at all.
.. i did this with my brand new Beta Evo a few years back as i scrtached them on the first ride .. and it was still fine 18 months later when i sold it
.. what i have done is use Araldite glue and dribble it into the scratches and heat a little with a heat gun.. then leave for two days to go hard.
Then i file and smooth down with wet and dry paper to a smooth finish so that you cant feel the scratches with your fingers as you run them over … mine have been like it for a while now and no oil leaks at all.
.. i did this with my brand new Beta Evo a few years back as i scrtached them on the first ride .. and it was still fine 18 months later when i sold it
Re: recherche tubes de fourche fantic 300
I have been looking on the site of 'Araldite',
are you talking about araldite fusion glue or araldite mastic de réparation métal???
are you talking about araldite fusion glue or araldite mastic de réparation métal???
janmaru- Messages : 213
Date d'inscription : 19/05/2014
Age : 56
Localisation : 11000 AUDE
Re: recherche tubes de fourche fantic 300
Ok, thank you.
I'll think that i will give it a try,
Keep you informed.
jan
I'll think that i will give it a try,
Keep you informed.
jan
janmaru- Messages : 213
Date d'inscription : 19/05/2014
Age : 56
Localisation : 11000 AUDE
Sujets similaires
» Recherche fourche ou tube fantic 125 tx 250 1980 1981
» recherche fourche
» Adaptation tubes de fourche
» RECHERCHE SEGMENT SPI FOURCHE
» Prix chromage tubes de fourche
» recherche fourche
» Adaptation tubes de fourche
» RECHERCHE SEGMENT SPI FOURCHE
» Prix chromage tubes de fourche
BIENVENUE SUR LE FORUM DU TRIAL A L'ANCIENNE :: Votre 1ère catégorie :: MOTOS (Les marques et modèles) :: FANTIC
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|