aprilia txr
3 participants
BIENVENUE SUR LE FORUM DU TRIAL A L'ANCIENNE :: Votre 1ère catégorie :: MOTOS (Les marques et modèles) :: AUTRES MARQUES...
Page 1 sur 1
aprilia txr
bonjour
j'ai une aprilia txr que je cherche à rénover.
Oui je sais , c'est pas vraiment une ancienne (freins a disque + monoshock) mais refroidissement a air quand même.
La question : comment trouver le filtre a air pour cette machine?
a+
j'ai une aprilia txr que je cherche à rénover.
Oui je sais , c'est pas vraiment une ancienne (freins a disque + monoshock) mais refroidissement a air quand même.
La question : comment trouver le filtre a air pour cette machine?
a+
monargue74- Messages : 337
Date d'inscription : 01/10/2010
Age : 59
Localisation : Haute Savoie
APRILLIA
BONJOUR SI TA BESOIN J AIS DE LA PIECE POUR CETTE MOTO POUR LE FILTRE IL FAUT LE FAIRE SYSTEME DDDDDDDD
Re: aprilia txr
Good bike but a bit older in design then a Beta TR34 for example, I like the smooth engine:
[Vous devez être inscrit et connecté pour voir cette image]
The air filter is sadly sold out.
The air filter is very special, that is how the original looked like on my TXR after cleaning:
[Vous devez être inscrit et connecté pour voir cette image]
So I fabricated a new one, this I made by myself:
[Vous devez être inscrit et connecté pour voir cette image]
Buy/get a standard air filter math, thickness around 10mm. cut out a pice in shape of a U, that has a quarter of the diameter at the short ends and is around 40mm in the top, then make the sides, glue everything together and there you are.
[Vous devez être inscrit et connecté pour voir cette image]
The air filter is sadly sold out.
The air filter is very special, that is how the original looked like on my TXR after cleaning:
[Vous devez être inscrit et connecté pour voir cette image]
So I fabricated a new one, this I made by myself:
[Vous devez être inscrit et connecté pour voir cette image]
Buy/get a standard air filter math, thickness around 10mm. cut out a pice in shape of a U, that has a quarter of the diameter at the short ends and is around 40mm in the top, then make the sides, glue everything together and there you are.
PSchrauber- Messages : 68
Date d'inscription : 19/06/2013
Age : 59
Localisation : Hannover, Allemange
BIENVENUE SUR LE FORUM DU TRIAL A L'ANCIENNE :: Votre 1ère catégorie :: MOTOS (Les marques et modèles) :: AUTRES MARQUES...
Page 1 sur 1
Permission de ce forum:
Vous ne pouvez pas répondre aux sujets dans ce forum
|
|